Filter
Top Products
Installing and Replacing Mobile Board Components
57
Installing a Wireless LAN Card
A wireless LAN card can be installed in either the Mobile Board’s PCI Express Full-Mini
connector (Figure 2, J) or its PCI Express Half-Mini card co
nnector (Figure 2, P).
To install a wireless LAN card on the Mobile Board, see Figure 25 and Figure 26 and
follow these steps:
1. Observe the precautions in "Before You Begin" on page 35.
2. Insert the wireless LAN
card (Figure 25, A and Figure 26, A) into the PCI Express
Mi
ni Card connector (Figure 25, B and Figure 26, B) at a slightly upward angle.
3. Al
ign the mounting holes (Figure 25, C and Figure 26, C) and snap the card in
place.
Figure 25. Installing a PCI Express Full-Mini Wireless LAN Card