Filter
Top Products
Installing and Replacing Mobile Board Components
59
Installing an Intel
®
Turbo Memory Card
An Intel Turbo Memory card can be installed in either the Mobile Board’s PCI Express
Full-Mini connector (Figure 2, J) or its PCI Express Half-Mini card connector
(Figure 2, P).
T
o install an Intel Turbo Memory card on the Mobile Board, see Figure 28 and
Figure 29 and follow these steps:
1. Observe the
precautions in "Before You Begin" on page 35.
2. Insert the I
ntel Turbo Memory card (Figure 28, A and Figure 29, A) into the PCI
Express
Mini Card connector (Figure 28, B and Figure 29, B) at a slightly upward
angle.
3. Al
ign the mounting holes (Figure 28, C and Figure 29, C) and snap the card in
place.
Figure 28. Installing a PCI Express Full-Mini Intel Turbo Memory Card