Filter
Top Products
Hardware Installations and Upgrades
Intel
®®
Server System R1000GZ/GL Service Guide 35
Removing the Intel
®
RMM4 NIC
1. Remove the two screws as shown (see letter “A”).
2. Remove the module out of the server system (see letter “B”).
Figure 58. Removing the Intel
®
RMM4 NIC
Installing and Removing the Intel
®
RAID Smart Battery
Installing the Intel
®
RAID Smart Battery
1. Connect the cable between the BBU and the RAID card. For details, see Intel
®
RAID Smart
Battery User’s Guide.
2. Locate the BBU bracket inside the chassis. Align the tabs on the plastic battery holder with
mounting holes on the BBU bracket (see letter “A”).
3. Slide the plastic battery holder toward the rear of the system until the tabs engage with the
mounting holes in the BBU bracket (see letter “B”).
Figure 59. Installing the Intel
®
RAID Smart Battery