Filter
Top Products
Hardware Installations and Upgrades
Intel
®®
Server System R1000GZ/GL Service Guide 37
Figure 62. Removing the power supply module
2. Do one of the following:
- Insert the power supply module into the power supply cage and push all the way until it
clicks into place (see letter “B”).
Figure 63. Installing the power supply module
- If no power supply is to be installed, install the filler panel into the power supply cage.
Figure 64. Installing the filler panel
Installing and Removing the Server Board
Removing the Server Board
1. Disconnect all cables from the server board.
2. Remove the four screws to release the air duct side wall (see letter “A”).
3. Lift the air duct side wall straight up to remove from the server board (see letter “B”).