SE7221BK1-E Technical Product Specification
Revision 1.3
2
2. Server Board Overview
2.1 SE7221BK1-E Feature Set
The Intel® Server Board SE7221BK1-E supports the following feature set:
Processor and Front Side Bus (FSB) support
- Supports single Intel® Pentium® 4 and Celeron® processors in an LGA775 package
- Capable of 800 MT/s on system bus
- Supports Hyper-Threading Technology
- Supports Intel® Extended Memory System 64 Technology (EM64T)
Intel® E7221 chipset components
- GMCH integrated graphics controller in GMCH component (Intel® GMA 900)
- ICH6R I/O controller
- PXH PCI-X Hub
- 12-deep In-Order Queue
Memory System
- 4 DIMM sockets supporting 400/533MHz DDR2 DIMMs
- Data bandwidth per channel of 4.2GB/s or 8.5GB/s in dual channel when using DDR2
533MHz
-Support for up to two DDR2 channels for a total of 4 DIMMs (2 DIMMs /Channel) providing
up to 4GB max memory capacity.
-Support for 256MB, 512MB, 1GB and 2GB DRAM sizes
-Supports Performance Acceleration Technology (PAT)
I/O Subsystem
Four independent PCI Buses:
Segment A: One PCI 32-bit/33-MHz, 5 V connector supporting full length PCI add-in
cards and one embedded device(Supports PCI Specification, Rev 2.3)
One Intel® 10/100/1000 82541PI gigabit Ethernet Controller
Segment B: One PCI 32-bit/66-MHz embedded device (SE7221BK1LX sku only)
One Intel® 10/100/1000 82541PI gigabit Ethernet Controller
Segment C: Two PCI-X 64-bit/66-MHz, 3.3 V slots supporting full length / full height PCI
/ PCI-X add-in cards or one 3.3V PCI-X 64-bit/100-MHz slot with riser card (SE7221BK1LX
sku only)
Segment D: One x8 PCI Express* slot supporting x1/x2/x4/x8 PCI Express* add-in card
or one x8 PCI Express* slot with riser card (SE7221BK1LX sku only)
Serial ATA host controller
- Four independent SATA ports supports data transfer rates up to 1.5 Gb/s (150MB/s) per
port
IDE controller
- One IDE connector, supporting up to two ATA-100 compatible devices