Filter
Top Products
SE7221BK1-E Technical Product Specification
51
Feature Options Help Text Description
ECC Event Logging
Disabled
Enabled
Enables or Disables ECC Event Logging. Grayed out if
"Critical
Event
Logging"
option is
disabled.
PCI Error Logging
Disabled
Enabled
Enables or Disables PCI Error Logging. Grayed out if
"Critical
Event
Logging"
option is
disabled.
9.5.7 Exit menu
Table 66. BIOS Setup, Exit Menu Selections
Feature Options Help Text
Save Changes
and Exit
N/A Exit system setup after saving the changes.
F10 key can be used for this operation.
Discard
Changes and
Exit
N/A Exit system setup without saving any changes.
ESC key can be used for this operation.
Discard
Changes
N/A Discards changes done so far to any of the setup questions.
F7 key can be used for this operation.
Load Setup
Defaults
N/A Load Setup Default values for all the setup questions.
F9 key can be used for this operation.
Load Custom
Defaults
N/A Load custom defaults.
Save Custom
Defaults
N/A Save custom defaults
9.6 Upgrading the BIOS
9.6.1 Preparing for the Upgrade
Before you upgrade the BIOS, prepare for the upgrade by recording the current BIOS settings,
obtaining the upgrade utility, reviewing the release notes, and making a copy of the current
BIOS.
9.6.1.1 Recording the Current BIOS Settings
1. Boot the computer and press <F2> when you see the message:
Press <F2> Key if you want to run SETUP
2. Write down the current settings in the BIOS Setup program or go to the Exit menu and
choose to “Save Custom Defaults”.
Note: Do not skip step 2. You will need these settings to configure your computer at the
end of the procedure.