Filter
Top Products
30 Advantage! 9000 Series User’s Manual
Figure 16. Inserting a Drive Into A Drive Bay
6.
Attach a cable (Figure 17) from the power supply to the
drive, then attach a controller cable:
Figure 17. Drive Cables
•
To use the built-in floppy controller, connect the
controller cable that extends from the floppy drive
controller connector on the system board (see the
illustration in the back of this manual).
Zip drive not shown in
this illustration.
3694manl.bk : 3694manl.fm Page 30 Tuesday, December 24, 1996 9:15 AM