Filter
Top Products
58 Advantage! 9000 Series User’s Manual
•
Does the computer report a CMOS or battery failure
error? Run System Setup to check your configuration. If
the configuration settings are lost, the computer battery
has run out and needs to be replaced (see “Replacing the
Computer Battery” on page 58).
As you use the CD-ROM drive, you may encounter one of three
errors:
•
A Windows “Invalid Path” dialogue box presents the
message, “The working directory is invalid.” In this
case, there is no CD in the drive. Press <Esc>, insert the
correct CD, and double-click the icon again.
•
A Windows “Application Execution Error” dialogue box
appears on the screen. The wrong CD is in the drive.
Press <Esc>, insert the correct CD, and double-click the
icon again.
•
No error message appears but the program does not run.
Insert the correct CD and run the program again.
If the computer boots but your printer does not print, make sure
the printer is properly connected and turned on. Most printers
require that you install printer driver software from a floppy
disk before the printer works correctly with the computer. (See
the manual for the device for instructions.)
If the computer boots but does not run properly, is the computer
unable to use the hard disk you installed? Make sure it is
configured in System Setup (see “Configuring Your Computer”
on page 41). Also, make sure you have partitioned and
formatted the drive (See your Windows 95 documentation).
Replacing the Computer Battery
If the computer reports a CMOS or battery failure error, you
may need to replace the battery. Run System Setup to check
your configuration settings. If the settings are lost, replace the
battery.
To replace the battery:
3694manl.bk : 3694manl.fm Page 58 Tuesday, December 24, 1996 9:15 AM