Filter
Top Products
46 Ascentia M Series User’s Manual
Press <Home> to display the first page, or press <End> to go to
the last page. To exit the help window, press <Enter> or <Esc>.
If your computer will not boot after you have changed settings
in System Setup and exited the program, reboot and press <F2>
to reenter System Setup. Once in System Setup, you can try to
change the values that caused your computer boot to fail. If the
problem persists, press <F9> to load the default values.
Main Menu
When you open System Setup, the Main menu appears. You can
make changes to your computer’s basic system configuration
from this menu. The fields displayed in this menu are described
below.
System Time: Sets your computer to the time that you specify,
usually the current time. Enter the hour, minute, and second in
the format hh:mm:ss. Use a 24-hour clock. Use the tab key to
move between the hour, minute, and second cells. Use the
hyphen key <-> or <Space> bar to decrease or increase the
numbers.
System Date: Sets your computer to the date that you specify,
usually the current date. Enter the month, day, and year in the
format mm:dd:yyyy. Use the tab key to move between the month,
day, and year cells. Use the hyphen key <-> or <Space> bar to
decrease or increase the numbers. This field supports year dates
of 2000 and beyond.
Diskette A: Specifies a drive type for floppy drive A. Drive A is
the floppy drive that is inserted in the SmartBay of your
computer. Diskette A options are Not Installed and 1.44 MB,
3 1/2”(default).
IDE Adapter 0 and IDE Adapter 1: Your computer can support
two IDE drives. The Main menu contains two IDE adapter fields
to configure these drives. IDE Adapter 0 defines the hard drive
installed in the computer. IDE Adapter 1 defines the CD-ROM
drive.
3754-1.bk : 3754-3.fm Page 46 Wednesday, July 30, 1997 2:33 PM