Filter
Top Products
For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST)
5
• Slide the Roll Media onto the Media Hub and raise the Media Hub Guide. The Media Hub
Guide should be pushed inward so that it is just touching the Roll Media.
• Route the Media through the printer as shown. Raise the Media Guide. The Media Guide
should be pushed inward so that it is just touching the edge of the Media.
1. Label Roll Media
2. Media Hub Guide
3. Media Sensor
4. Media Guide
• Close the Printhead Assembly and press down until it locks into place.
• Close the cover and press the FEED button several times to position the media and ensure
proper tracking.
Label Media Sensor Adjustment
The Media Sensor needs to be positioned so that the printer can detect the presence of label
media and the top-of-form (except for continuous stock, where the TOF is set through the front
panel.
1. Printhead assembly