Kodak ESP 5 Printer User Manual


 
Kodak ESP 5 Printer User Guide 17
You can print images directly from PictBridge, image-transfer digital cameras, mass
storage cameras, thumbdrives, and memory cards. You can also print photos and most
types of files that can be printed from a computer program from a portable storage (“flash”)
drive, or from any computer connected to your All-in-One printer.
Although this All-in-One printer is compatible with the Kodak 8-in-1 USB card reader (sold
separately) as well as other Kodak USB card readers, it is not compatible with other
manufacturers’ card readers. An 8-in-1 card reader can be plugged into the front USB port
on your Kodak All-in-One printer.
Viewing Photos
Insert one of the following plug-and-play devices into the appropriate slot:
4
Viewing and Printing
Photos
4
Note: For assistance on printing from a connected computer to this
All-in-One, refer to the instructions from the software application
(such as a word-processing or image-editing program) used to send
the file to the printer; or, review your computer’s operating system
instructions.
Warning: Do not remove a storage device (memory card, portable
storage drive, or image-transfer camera) from the printer while it is
being accessed, or you may damage the files on it. Safely remove the
device only after the green status light, located next to the memory card
slots, stops blinking.
Note: Always use the USB port on the front of the printer. To avoid an
error, use only one slot or port at a time.
Device Type Printer Slot
Memory Card Memory Card Reader
Portable Storage Drive USB port