Filter
Top Products
A-61510 January 2005 4-20
Buttons on the
Scanner Settings
dialog box
Following are descriptions of the buttons located at the bottom of the
dialog box.
Scanner Control displays the Scanner Control dialog box. This
dialog box allows you to set multi-feed detection, transport control,
enable/disable lamp saver and set the programmable key functions. The
settings in this dialog box do not affect the quality of the image. See the
section entitled, “Setting scanner controls” later in this chapter.
Imprinter displays the Imprinter dialog box, which allows you to
enable the Document Printer 1 and set the desired values. See the
section entitled, “Enabling and setting Document Printer options” later in
this chapter.
Patch/Batch when selected, will display the Batch and Patch Code
Definition dialog box. This dialog box allows you to define logic
associated with automating your scanner’s workflow. The settings in this
dialog box do not affect the quality of the image. See the section entitled,
“Defining Batch Detection and Patch Code values” later in this chapter.
Image Address displays the Image Address dialog box. This dialog
box contains controls to format the image addressing functions of the
scanner. See the section entitled, “Image Addressing” later in this
chapter.
Color Dropout displays the Color Dropout dialog box. You can
choose the color you want to eliminate (Green Blue, Red) and set other
values using this dialog box. See the section entitled, “Setting Color
Dropout values” later in this chapter.
Copy see the explanation in the section entitled “Scanner Settings
dialog box” earlier in this chapter.
OK saves the values set on the dialog box.
Cancel closes the dialog box without saving any changes.