Filter
Top Products
A-61510 January 2005 4-34
Enabling Patch Codes
Patch Control allows you to select what patch types to recognize. One or
more patches can be selected at a time.
Enable Patch Codes to enable Patch Codes click the Enable Patch
Codes box.
Recognition Modes allows you to select the patch type the scanner
will recognize. You can select Level 2, Level 3, Feature Patch, or
Transfer Patch. Each of these patch types is described in detail below.
Patch Types Level 2, Level 3 and Transfer these patch types are
used for image addressing. When the Patch Reader detects a patch, it
automatically assigns a new image address to the new document. This
eliminates the task of trying to determine where one document stops
and the next starts when an operator is viewing electronic images. It
provides a hierarchical document structure and offers an auto-batching
alternative.
The Patch Reader controls document level changes by automatically
sensing a predefined patch code and changing the document level
accordingly.
Patch 2 — assigns a Level 2 to the current document.
(Do not use these patches for production – they
are not to spec)
Patch 3 — assigns a Level 3 to the current document.
(Do not use these patches for production – they
are not to spec)
Patch T/Transfer Patch — assigns a predetermined level to the next
document. Defined by selecting Level 2 or Level 3 in the Definition box.
(Do not use these patches for production – they
are not to spec)