Filter
Top Products
A-61510 January 2005 3-1
3 Using the TWAIN Data Source
Installation
The TWAIN Data Source is included with the scanner. You can install the
data source from the CD.
1. Insert the CD into the drive.
2. Double-click the setup.exe file.
3. Follow the instructions on each screen as prompted.
After installation is complete, install your application software on the
host PC.
After your application software is loaded and launched use the TWAIN
Data Source software to setup your scanner.
A sample TWAIN Data Source application, called the Scanner Validation
Tool, is also installed during this installation. This application can be
used to validate scanner functionality. The screen shots below (from the
Scanner Validation Tool) document the TWAIN Data Source graphical
user interface (GUI) which can be one option when creating your own
application. If you choose to use programmatic controls, refer to the
readme.txt file located in your default Windows directory
\twain_32\kodak\kds_i800 which documents this TWAIN functionality.
The file ramscan.txt in the same directory includes the information you
need to use the TWAIN Data Source for RAM scanning which simulates
an i800 Series Scanner in order for you to begin development work
without a physical scanner.