Filter
Top Products
C650 3-70
Administrator mode
3
2
Reminder
In order to apply the changes to the settings for "NetBIOS Name", "Print Service Name", and
"Workgroup", restart the machine (turn it off, then on again).
When the machine is turned off, then on again, turn the machine off with the [Power] (auxiliary power)
key before turning off the main power switch. In addition, wait at least 10 seconds to turn the machine
on after turning it off; otherwise, the machine may not operate correctly.
SMB Setting - Direct Hosting Setting
Specify the settings for direct hosting services.
2
Reminder
To specify a destination computer using the computer name in the IPv6 environment, the Direct Hosting
setting must be enabled. To enable the Direct Hosting setting, prepare a DNS server and be sure to
specify the DNS settings of this machine correctly. For details on specifying the DNS server settings,
refer to "TCP/IP Setting - TCP/IP Setting" on page 3-53.
Item Description
SMB Print Select whether or not the SMB printing (Windows printing) service is used.
NetBIOS Name
*
Type the NetBIOS name in uppercase letters (up to 15 characters, including only -).
Print Service Name
*
Type the name of the print service in uppercase letters (up to 12 characters, exclud-
ing / and \).
Workgroup
*
Type the name of the workgroup in uppercase letters (up to 15 characters, exclud-
ing “ \ ; : , * < > | + = and ?).
Item Description
Direct Hosting Setting To use the direct hosting service, select "ON".
To communicate with the destination using an IPv6 address, select "ON".