Filter
Top Products
C650 3-9
Administrator mode
3
Date/Time Setting - Time Adjustment Setting
Select whether the date and time of the machine can be adjusted through passive acquisition from the NTP
server.
!
Detail
In order to specify the settings on the Time Adjustment Setting page, the time zone must first be
specified. For details, refer to "Date/Time Setting - Manual Setting" on page 3-8.
Timer Setting - Power Save Setting
Specify the settings for the machine’s power-saving modes.
Item Description
Time Adjustment Setting Select whether or not the time is automatically adjusted with NTP.
NTP Server Address Type in the NTP server address.
To type in the host name, select the "Please check to enter host name." check box.
If the machine is set to use IPv6, an IPv6 address can also be specified. The only
symbols that can be used are the dash (-) and period (.).
Port No. Type in the NTP server port number. (Range: 1 to 65535)
[Adjust] button Click this button to connect to the NTP server with the specified conditions and ad-
just the time.
Item Description
Low Power Mode Setting Specify the length of time until the machine enters Low Power mode.