Kyocera 3920DN Printer User Manual


 
Using the Operation Panel 7-19
Job Box
Job box implements the Job Retention function and Job Storage function
that are available from the printer driver. The settings are specified from
the printer driver. Refer to KX Printer Driver User Guide for the driver
settings.
In either job mode, when printing a document, the print data is
transferred from the computer to the printer then stored on the printer’s
hard disk. Since copies of the document are printed using the stored
data, printing is performed faster with less computer spooling time and
less network traffic.
Job Retention
Job Retention has four modes as summarized below. These modes are
selected from the printer driver through the application software:
IMPORTANT To use the Job Box, an optional hard disk must be
installed in the printer.
The RAM disk may also be used in the Proof-and-Hold and Private
Print modes.
Quick Copy Proof-and-Hold Private Print Stored Job
Primary function To later print
additional copies
To proof the first copy
before printing
multiple copies
To hold the document
in printer to prevent
unauthorized access
To electronically store
documents such as
fax cover pages
Start storing by Printer driver Printer driver Printer driver Printer driver
On terminating print
setting from
application software
Prints simultaneously Prints one copy
simultaneously
Does not print Does not print
Retrieved by Operation panel Operation panel Operation panel Operation panel
Default number of
copies printed at
retrieval
Same as storing
(can be changed)
One less
(can be changed)
Same as storing
(can be changed)
One
(can be changed)
Maximum number of
jobs stored
*
32, expandable to 50 32, expandable to 50 Depends on the hard
disk capacity
Depends on the hard
disk capacity
PIN security No No Yes Yes (if necessary)
Data after printing Stored Stored Deleted Stored
Data at power off Deleted Deleted Deleted Stored
Hard disk Necessary Unnecessary
(RAM disk may also
be used)
Unnecessary
(RAM disk may also
be used)
Necessary
*. Jobs in excess will cause the earlier ones to be deleted.