Filter
Top Products
Basic Operation
3-55
3
Program
By registering sets of frequently used functions as a single program, you can simply press the program number
as needed to recall those functions. You can also name the programs for easy identification when recalling.
The programs below have been preregistered. The registered contents can be re-registered for easier use in
your environment.
NOTE: Up to 50 functions combining copying and sending can be registered in the program.
If user login administration is enabled, you can only register functions by logging in with administrator privileges.
Registering Programs
Use the procedure below to register a program.
The following procedure is an example of registering the copying function.
1 Press the Program key while the copy mode is
accessed.
2 Press [Add] and press a number (01 to 50) for the
program number.
If entering Program screen from the Copy screen,
Send screen or Document Box screen, go to step 4.
NOTE: If you select a program number already
registered, the currently registered functions can be
replaced with a new set of functions.
3 Check that [Copy] is selected, and press [Next].
4 Enter the new program name and press [Save] to
register the program.
Number Program name Default Registration
01 ID Card Copy Copying function
Color: Black & White
Combine: [2 in 1]
Continuous Scan: [On]
Original Size: Statement (A5-R)
Paper Selection: Cassette 1
Zoom: Auto Zoom
02 Eco Copy Copying function
Color: Black & White
EcoPrint: [On] (Level [5])
03 Confidential Stamp Copying function
Color: Black & White
Prevent Bleed-thru: [On]
Stamp: Confidential
Font Size: middle
Font Color: [Black]
Stamp Position: [Center]
Display Pattern: [Transparent]