Kyocera FS-1300D Printer User Manual


 
Using the Operation Panel 4-73
PanelReset Timer (Setting the panel reset timer)
When Auto Panel Reset is set to On, this sets the time until the panel
is automatically reset after the user stops using the panel.
The default setting is 90 seconds.
1 In the Timer Setting menu, press U or V to select PanelReset
Timer.
2 Press [OK]. The PanelReset Timer screen appears.
3 Use the arrow keys to set the panel reset time.
Press U or V to increase or decrease, respectively, the value at the
blinking cursor.
Use Y and Z to move the cursor right and left.
4 Press [OK]. The panel reset time setting is stored and the Timer
Setting menu reappears.
PanelReset Timer:
a
b
(5 - 495)
/90-
sec.
M