Lantronix 900-588 Network Card User Manual


 
4. Using DeviceInstaller
This chapter covers the steps for getting the Micro125 device server online and viewing its
current configuration.
Note: DeviceInstaller is a free utility program provided by Lantronix that
discovers, configures, upgrades, and manages Lantronix Device Servers. It
can be downloaded from the Lantronix website at
www.lantronix.com/support/downloads.
For instructions on using DeviceInstaller to configure the IP address and
related settings or for more advanced features, see the
DeviceInstaller
Online Help.
Installing DeviceInstaller
To install DeviceInstaller:
1. Download the latest version of DeviceInstaller from
http://www.lantronix.com/downloads.
2. Run the executable to start the installation process.
3. Respond to the installation wizard prompts. (If prompted to select an installation type,
select Typical).
Assigning an IP Address
The unit’s IP address must be configured before it can work correctly on a network. You have
several options for assigning an IP to your unit. We recommend that you manually assign the
IP address over the network using DeviceInstaller.
Note: To use a serial connection instead of an Ethernet connection to configure the device,
see Chapter 6: Configuration via Telnet or Serial Port (Setup Mode).
The unit’s IP address is normally set to 0.0.0.0 at the factory. The hardware address is on the
product label. The unit is DHCP enabled as the default.
To assign an IP address manually:
1. Click StartAll Programs LantronixDeviceInstaller 4.3DeviceInstaller. If your
PC has more than one network adapter, a message displays. Select an adapter and click
OK.
Note: If the unit already has an IP address (e.g., DHCP has assigned an IP address), click
the Search icon and select the unit from the list of Lantronix device servers on the local
network.
2. Click the Assign IP icon
.
3. If prompted, enter the hardware address (on the product label) and click Next.
Micro125 User Guide 14