Filter
Top Products
9. Setup Mode: Advanced Settings
Expert Settings (Option 5)
Note: You can change the Enable alternate MAC setting using telnet or serial connections
only. It is not available through the Web-Manager.
CAUTION: Only an expert should change these parameters. You must definitely know
the consequences the changes might have.
Figure 9-1. Expert Settings
TCP Keepalive time in s (1s – 65 s; 0s-disable): (45) ?
ARP Cache timeout in s (1s – 600s) : (600) ?
Disable Monitor Mode @ bootup (N) ?
HTTP Port Number : (80) ?
MTU Size (512 – 1400): (1400) ?
TCP Re-transmission Timeout (500 - 4000) (ms): (500) ?
Enable alternate MAC (N) ?
Ethernet connection type: (0) ?
The default settings are listed below:
Table 9-1. Expert Settings: Details Settings
Device Details Settings Description
TCP Keepalive time in s
(1s – 65s; 0s=disable)
45
ARP Cache timeout in s (1s – 600s)
600
Disable Monitor Mode @ bootup
No
HTTP Port Number (1-65535)
80
MTU Size (512 – 1400)
0 (resulting in an operational value of 1400)
TCP Re-Transmission Timeout
(500-4000)
500 (msec)
Enable alternate MAC
No (OEM use only)
Ethernet connection type
0 (resulting in auto-negotiation)
TCP Keepalive Time in Seconds
This option allows you to change how many seconds the unit waits during a silent connection
before attempting to see if the currently connected network device is still on the network. If
the unit gets no response, it drops that connection.
TCP Keepalive time in s (1s – 65s; 0s=disable): (45)? _
Micro125 User Guide 56