Filter
Top Products
7: Setup Mode: Server Configuration
Change Telnet/Web-Manager Password
Setting the Telnet/Web-Manager password prevents unauthorized access to the setup menu
through a Telnet connection to port 9999 or through web pages. The password must have 4
characters.
Change Telnet/Web-Manager password (N) ? _
An enhanced password setting (for Telnet access only) of 16 characters is available under
Security Settings (Option 6) on page 58.
Note: You do not need a password to access the Setup Mode window by a serial connection.
DHCP Name
If a DHCP server has automatically assigned the IP address and network settings, you can
discover the unit by using the DeviceInstaller network search feature.
There are three methods for assigning DHCP names to the unit.
Default DHCP Name: If you do not change the DHCP name, and you are using an IP of
0.0.0.0, then the DHCP name defaults to CXXXXXX (XXXXXX is the last 6 digits of the MAC
address shown on the label on the bottom/side of the unit). For example, if the MAC address
is 00-20-4A-12-34-56, then the default DHCP name is C123456.
Custom DHCP Name: You can create your own DHCP name. If you are using an IP
address of 0.0.0.0, then the last option in Server configuration is Change DHCP device
name. This option allows you to change the DHCP name to an alphanumeric name (LTX in
our example).
Change DHCP device name (not set) ? (N) Y
Enter new DHCP device name : LTX
Numeric DHCP Name: You can change the DHCP name by specifying the last octet of the
IP address. When you use this method, the DHCP name is LTXYY where YY is what you
chose for the last octet of the IP address. If the IP address you specify is 0.0.0.12, then the
DHCP name is LTX12. This method only works with 2 digit numbers (01-99).
Micro125 User Guide 40