Filter
Top Products
5: Configuration Using Web Manager
xDirect User Guide 26
Server Configuration
The unit’s server values display when you select Server from the main menu. The following
sections describe the configurable parameters on the Server Settings page.
Figure 5-4 Server Settings
To configure the xDirect device server settings:
1. On the main menu, click Server.
2. Configure or modify the following fields:
Server Configuration
Advanced
Enhanced Password Select whether to enable advanced password:
Enable: selecting this option enables advanced password creation,
allowing you to create passwords up to 16 bytes in length.
Disable: selecting this option disables advanced password creation,
allowing you to create basic passwords up to 4 bytes in length.
Telnet/Web Manager
Password
Enter the password required for Telnet configuration and Web Manager
access. No password or entering a “blank” password entry will disable default
password protection.
Retype Password Re-enter the password required for Telnet configuration and Web Manager
access.
ARP Cache Timeout (secs) When the unit communicates with another device on the network, it adds
an entry into its ARP table. ARP Cache timeout defines the number of
seconds (1-600) before it refreshes this table.