Filter
Top Products
9: Setup Mode: Advanced Settings
xDirect User Guide 57
Caution: Disabling both Telnet Setup and Port 77FE will prevent users from
accessing the setup menu from the network. Disabling Port 77FE also
disables the Web from configuring the device.
Select 6 to configure security settings.
Figure 9-2 Security Settings
Disable SNMP (N) ?
SNMP Community Name (public):
Disable Telnet Setup (N) ?
Disable TFTP Firmware Update (N) ?
Disable Port 77FEh (N) ?
Disable Web Server (N) ?
Disable Web Setup (N) ?
Disable ECHO ports (Y) ?
Enable Encryption (N) ?
Enable Enhanced Password (N) ?
Disable SNMP
This setting allows you to disable the SNMP protocol on the unit for security reasons. The default
setting is N (No).
Disable SNMP (N) ? _
SNMP Community Name
The SNMP Community Name is a required field for NMS to read or write to a device. Enter a string
of 1 to 13 characters. The default setting is public.
SNMP Community Name (public): _
The default entry is public. The current value is displayed in parentheses.
Disable Telnet Setup
Note: If you choose to disable this option, keep in mind that disabling both Telnet Setup
and Port 77FE will prevent users from accessing the setup menu from the network.
This setting defaults to the N (No) option. The Y (Yes) option disables access to Setup Mode by
Telnet (port 9999). It only allows access locally using the web pages and the serial port of the unit.
Disable Telnet Setup (N) ? _