Filter
Top Products
5: Configuration Using Web Manager
xDirect User Guide 27
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
TCP Keepalive (secs) TCP Keepalive time defines how many seconds the unit waits during an
inactive connection before checking its status. If the unit does not receive
a response, it drops that connection. Enter a value between 0 and 60
seconds. 0 disables keepalive. The default setting is 45.
Monitor Mode @ Bootup Select Disable to disable entry into the monitor mode using the yyy or xx1
key sequence at startup. This field prevents the unit from entering monitor
mode by interpreting the stream of characters that are received during the
device server's initialization at startup. The default setting is Enable.
CPU Performance Mode Select the xDirect's performance mode. Higher performance settings
require more energy. Low is 26 MHz. Regular is 48 MHz; High is 88 MHz.
The default is Regular.
HTTP Server Port This option allows the configuration of the web server port number. The
valid range is 1-65535. The default setting is 80.
Config Server Port Not applicable for this product.
MTU Size The Maximum Transmission Unit (MTU) is the largest physical packet size
a network can transmit for TCP and UDP. Enter between 512 and 1400
bytes. The default setting is 1400 bytes.
TCP Re-transmission
timeout (ms)
The desired TCP re-transmission timeout value. If the ACK is not received
for a packet sent from the xDirect device, then the unit will retransmit the
data. The valid range is 500-4000 msec. The default is 500.