Filter
Top Products
3: Installation of PremierWave XN
PremierWave XN User Guide 22
Figure 3-11 PremierWave XN Bottom/Back Panel View
Wi-Fi Protected Setup (WPS)
Using WPS, you have the option of connecting to PremierWave devices with a router or access
point in a single operation instead of manually creating a profile with a network name (SSID),
setting up wireless security parameters and updating the choice list.
Figure 3-12 PremierWave XN WPS Button
To Start WPS
Using the Device
1. Place the end of a paper clip or similar object into the WPS opening (see Figure 3-12) and
press and hold down for a minimum of 5 seconds.
2. Remove the paper clip to release the button. The unit will start Wi-Fi Protected Setup.
Antenna Terminal Barrel Ethernet Antenna
Block Plug
Power Power
(3-pin)
V-
V+
WPS Button
(pin hole opening)