Filter
Top Products
6: Network Settings
PremierWave XN User Guide 39
Table 6-8 WLAN Profile Basic Settings
To Configure WLAN Profile Basic Settings
Using Web Manager
To view or edit an existing WLAN profile or to create a new profile, click WLAN Profiles on the
menu and select an existing profile.
Delete (checkbox) Click the Delete checkbox beside the profile(s) to be deleted. Three
buttons will appear:
Click the Submit button to permanently delete profile(s).
Click the Apply button to delete the profile for testing purposes. If the
device reboots, this change will not be applied.
Click the Cancel button to cancel this action, as desired.
Enabled (checkbox) Click the Enabled checkbox beside the profile(s) to be enabled. Three
buttons will appear:
Click the Submit button to permanently enable profile(s).
Click the Apply button to enable the profile for testing purposes. If the
device reboots, this change will not be applied.
Click the Cancel button to cancel this action, as desired.
WLAN Profile
(link to specific profile)
Click on a specific WLAN Profile name to edit the WLAN profile basic
settings (see Table 6-8).
WLAN Profile Basic Settings Description
Network Name (SSID) Specify the name of the wireless network (SSID.)
Warning: Creating a new profile with a pre-existing network
name will cause the original network name and associated profile
to be overwritten.
State Select to Enable or Disable.
Topology Specify Infrastructure (ESS) or Adhoc (IBSS) mode.
Infrastructure: mode that communicates with access points.
Adhoc: mode that communicates with other clients.
Channel Specify the channel for an Adhoc network.
Note: This setting only applies to the creation of an Adhoc network.
Scan 2.4 GHz Band Select to Enable or Disable scanning for a WLAN profile on the 2.4 GHz
band.
Note: Setting this value to “Disabled” prevents this profile from
connecting to any device operating in the 2.4 GHz band.
Scan 5 GHz Band Select to Enable or Disable scanning for a WLAN profile on the 5 GHz
band.
Note: Setting this value to “Disabled” prevents this profile from
connecting to any device operating in the 5 GHz band.
Scan DFS Channels Select to Enable or Disable scanning on the DFS (Dynamic Frequency
Selection) channels in the 5 GHz band.
Note: This setting only applies if scanning in the 5 GHz band is enabled.
WLAN Profile Basic Settings Description