Filter
Top Products
12: Advanced Settings
PremierWave XN User Guide 84
Using the CLI
To enter Email command level: enable -> email 1
Using XML
Include in your file: <configgroup name=”email” instance=”1”>
Command Line Interface Settings
The Command Line Interface settings allow you to control how users connect to and interact with
the PremierWave XN's command line. It is possible to configure access via the Telnet and SSH
protocols, in addition to general CLI options.
Basic CLI Settings
The basic CLI settings control general CLI access and usability options.
Table 12-2 CLI Configuration Settings
To View and Configure Basic CLI Settings
Using Web Manager
To view CLI statistics, gclick CLI in the menu and select Statistics.
To configure basic CLI settings, gclick CLI in the menu and select Configuration.
Using the CLI
To enter CLI command level: enable -> config -> cli
Command Line Interface
Configuration Settings
Description
Login Password Enter the password for logins by the admin account. The default password is
“PASS”.
Enable Level Password Enter the password for access to the Command Mode Enable level. There is
no password by default.
Quit Connect Line Set the string used to terminate a connect line session and resume the CLI.
Type <control> before any key to be pressed while holding down the Ctrl key,
for example, <control>L.
Quit Connect Line Enter the Quit Connect Line string to be used to terminate a telnet or SSH
session and resume the CLI. Type <control> before the key to be pressed
while holding down the [Ctrl] key (example: <control>L>.
Inactivity Timeout Set a time period in which the CLI session should disconnect if no data is
received. Enter 0 to disable. Blank the display field to restore the default.
Line Authentication Enable or Disable authentication for CLI access on the serial lines.