Filter
Top Products
11: Maintenance and Diagnostics Settings
PremierWave XN User Guide 79
Table 11-9 Ping Settings
To Ping a Remote Host
Using Web Manager
To ping a Remote Host, gclick Diagnostics in the menu and select Ping.
Using the CLI
To enter the command level: enable
Using XML
Not applicable.
Traceroute
Here you can trace a packet from the PremierWave XN to an Internet host, showing how many
hops the packet requires to reach the host and how long each hop takes. If you visit a web site
whose pages appear slowly, you can use traceroute to determine where the longest delays are
occurring.
Table 11-10 Traceroute Settings
To Perform a Traceroute
Using Web Manager
To perform a Traceroute, gclick Diagnostics in the menu and select Traceroute.
Using the CLI
To enter the command level: enable
Using XML
Not applicable.
Diagnostics: Ping Settings Description
Host Enter the IP address or host name for the PremierWave to ping.
Count Enter the number of ping packets PremierWave should attempt to send
to the Host. The default is 5.
Timeout Enter the time, in seconds, for the PremierWave to wait for a response
from the host before timing out. The default is 5 seconds.
Diagnostics:
Traceroute Settings
Description
Host Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave when issuing the traceroute command.
Protocol Specify the traceroute protocol.