Filter
Top Products
PremierWave XN User Guide 60
9: Services Settings
DNS Settings
This section describes the active run-time settings for the domain name system (DNS) protocol.
The primary and secondary DNS addresses come from the active interface. The static addresses
from the Network Interface configuration settings may be overridden by DHCP.
Note: The blue text in the XML command strings of this chapter are to be replaced with
a user-specified name.
Table 9-1 DNS Settings
To View or Configure DNS Settings:
Using Web Manager
To view DNS current status, gclick DNS in the menu.
To lookup DNS name or IP address, gclick DNS in the menu to access the Lookup field.
Note: To configure DNS for cases where it is not supplied by a protocol, gclick Network
in the menu and select Interface -> Configuration.
Using the CLI
To enter the DNS command level: enable -> dns
Using XML
Include in your file: <configgroup name=”interface” instance=”eth0”>
Setting / Field Description
Lookup Perform one of the following:
Enter an IP address, and perform a reverse Lookup to locate the hostname for
that IP address
Enter a hostname, and perform a forward Lookup to locate the corresponding IP
address