Filter
Top Products
1. Press the tab 1 on the bezel that covers the bay of the power supply and insert a nger into the hole 2
in the middle of the bezel. Then, pull the bezel out to remove it.
Figure44. Removing the bay bezel for the power supply
2. Slide the power supply into the chassis until it snaps into position.
Figure45. Installing the power supply
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 65.
Removing or installing the system fans
This section provides instructions on how to remove or install the system fans.
Removing the system fans
Attention: Do not open your server or attempt any repair before reading and understanding the “Safety information”
on page iii and “Guidelines” on page 17.
This section provides instructions on how to remove the system fans.
Chapter 5. Installing, removing, or replacing hardware 55