Filter
Top Products
Table 18. Submenus under the Hardware Health Conguration
Item Option Description
Items and options with BMC conguration:
Auto Fan Control Disabled / [Enabled]
If this option is set to Disabled, the
fan runs at the full speed; if this option
is set to Enabled, the fan speed is
controlled by the system temperature.
PWM Minimal Duty Cycle [60% Duty Cycle] / 45% Duty Cycle
/ 30% Duty Cycle
Select the PWM Minimal Duty Cycle
for the fan: 60%-100%, 45%-100%,
or 30%-100%.
Sensor Data Register Monitoring Read Only
The sensor data in this option is for
read only. The detected data includes
the temperature, voltage and fan
speed.
Items and options without BMC conguration:
H/W Health Function Disabled / [Enabled]
Enable or disable the hardware
monitor function.
Auto FAN Control Disabled / [Enabled]
If this option is set to Disabled, the
fan runs at the full speed; if this option
is set to Enabled, the fan speed is
controlled by the system temperature.
PWM Minimal Duty Cycle [60% Duty Cycle] / 45% Duty Cycle
/ 30% Duty Cycle
Select the PWM Minimal Duty Cycle
for the fan: 60%-100%, 45%-100%,
or 30%-100%.
Fan Failure LED Indication
Disabled / [Enabled]
Enable or disable the fan alarm
function. If this option is set to
Enabled, a message about fan failure
will be displayed on the POST screen
when the rotational speed of each fan
is less than 800 rpm.
Hardware Health Event Monitoring
Read Only
The sensor data in this option is for
read only. The detected data includes
the temperature and system fan
rotational speed.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 19. Submenus under the IPMI 2.0 Conguration
Item Sub-item Option Description
View BMC System Event
Log
View the system event log.
Clear BMC System Event
Log
Delete the system event
log.
Set LAN Conguration Set the IP address source,
IP address, subnet mask,
and gateway address.
Set PEF Conguration PEF SUPPORT Disabled / [Enabled]
Enable or disable the PEF
support.
74 ThinkServer Installation and User Guide