Filter
Top Products
4
4
When installing: Plug the orange cable into the main connector, and the blue cable into the auxiliary
connector.
Removal steps of mSATA solid-state drive
The computer comes with either a PCI Express Mini Card for wireless WAN or an mSATA solid-state drive. If
the computer is equipped with an mSATA solid-state drive, it is installed in the wireless WAN card slot.
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the computer is operating or in suspend mode.
• Ensure that you partition the mSATA solid-state drive after installing it on the computer you are servicing.
Otherwise, the mSATA solid-state drive will not function correctly. For instructions on on how to partition
an mSATA solid-state drive, go to http://www.lenovo.com/support/msata-fru.
1
Chapter 9. Removing or replacing a FRU 65