Filter
Top Products
3
When installing: Before you attach the thermal fan assembly to the computer, apply thermal grease, at an
amount of 0.2 grams. Either too much or too less application of grease can cause a thermal problem due to
imperfect contact with a component.
Removal steps of hard disk drive or solid-state drive connector
1
1
2
Step Screw (quantity) Color
Torque
1
M2 × 3 mm, wafer-head, nylon-coated (2) Silver
0.181 Nm
(1.85 kgf-cm)
When installing: Ensure that the hard disk drive or solid-state drive connector is attached rmly.
1090 LCD unit
For access, remove these FRUs in order:
• “1010 Hard disk drive or solid-state drive” on page 58
Chapter 9. Removing or replacing a FRU 73