Filter
Top Products
Note: You might want to note your power-on password in a safe place. Otherwise, if you forget it, you
have to take your computer to a Lenovo reseller or a marketing representative to have the password
canceled.
11. Press F10 to exit from the Setup Notice window.
Changing or removing the power-on password
To change the power-on password, follow the steps 1 through 9 above in “Setting a power-on password” on
page 56, typing your password to get access to the ThinkPad Setup.
To change the password, do the following:
1. In the Enter Current Password eld, type the current power-on password.
2. In the Enter New Password eld, type the new power-on password; then retype the password you just
entered to verify it in the Conrm New Password eld.
3. Follow step 10 and step 11 in “Setting a power-on password” on page 56 to change your power-on
password.
To remove the password, do the following:
1. In the Enter Current Password eld, type the current power-on password.
2. Leave the Enter New Password and Conrm New Password elds blank.
3. Follow step 10 and step 11 in “Setting a power-on password” on page 56 to remove your power-on
password.
Hard disk passwords
Two types of hard disk passwords help protect the information stored on the hard disk drive:
• User hard disk password
• Master hard disk password, which requires a user hard disk password
If a user hard disk password has been set, but no master hard disk password has been, the user must enter
the user hard disk password in order to gain access to les and applications on the hard disk drive.
The master password can be set and used only by a system administrator. Like a master key, it enables the
administrator to get access to any hard drive in a system. The administrator sets the master password; no
one else knows it. Then the administrator sets a user password for each computer in the network, and tells
each user the password for his or her computer. The user can then change the user password as desired,
but the administrator can still get access by using the master password.
Note: When a master hard disk password is set, only the administrator can remove the user hard disk
password.
Setting a hard disk password
1. Print these instructions.
2. Save all open les, and exit all applications.
3. Turn your computer off and then on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup opens.
5. Select Security, using the cursor directional keys to move down the menu.
6. Select Password.
7. Select Hard Disk x Password, where x is the number of the hard disk drive for which you want to
set a password.
Chapter 4. Security 57