Filter
Top Products
Replacing memory in the slot under the keyboard
1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer.
2. Close the computer display, and turn it over.
3. Remove the battery. For information about how to remove the battery, refer to “Replacing the battery”
on page 71
.
4. Loosen the screws 1 , and then remove the cover 2 .
5. If two memory modules are already in the memory slots, press out on the latches on both edges of
the socket at the same time 1 , and then remove an memory module 2 to make room for the new
one. Be sure to save it for future use.
6. Find the notch on the contact edge side of the memory module you are installing.
Attention: To avoid damaging the memory module, do not touch its contact edge.
Chapter 6. Replacing devices 77