Filter
Top Products
ENERGY STAR
Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply
with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
Temperature information
Ambient temperature 15.6 to 32.2°C (60 to 90°F) and 8% to 80% RH
Shipping and storage temperature -40°C to 43.3°C (110° Fahrenheit)
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I
(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard‑copy output from electronic inputs. 650 W
Copy The product is generating hard‑copy output from hard‑copy original
documents.
725 W
Scan The product is scanning hard‑copy documents. 190 W
Ready The product is waiting for a print job. 130 W
Sleep Mode The product is in a high‑level energy‑saving mode. 27 W
Hibernate The product is in a low‑level energy‑saving mode. 6.1 W
Off The product is plugged into a wall outlet, but the power switch is turned off. .0 W
Notices 311