Use To
Paper Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Collate
1,1,1 ‑ 2,2,2
1,2,3 ‑ 1,2,3
Stack the pages of a print job in sequence when printing multiple copies.
Note: “1,2,3 ‑ 1,2,3” is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Specify whether prints are on one side or on both sides of the page.
Note: “1 sided” is the factory default setting.
Duplex Binding
Long Edge
Short Edge
Define binding for duplexed pages in relation to page orientation.
Notes:
• Long Edge sets binding along the long edge of the page (left edge for portrait and top edge
for landscape).
• Short Edge sets binding along the short edge of the page (top edge for portrait and left
edge for landscape).
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Specify that multiple pages are printed on one side of a sheet.
Notes:
• Off is the factory default setting.
• The number selected is the number of pages that will print per side.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Print multiple-page images on one side of a paper.
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of pages and whether they are in portrait or landscape
orientation.
Paper Saver Orientation
Auto
Landscape
Portrait
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Paper Saver Border
None
Solid
Print a border on each page image.
Note: None is the factory default setting.
Understanding the printer menus 214