repeating defects appear on
prints 316
shadow images appear on
prints 317
skewed print 318
streaked horizontal lines appear
on prints 318
streaked vertical lines 319
toner fog or background
shading 321
toner rubs off 321
toner specks appear on prints 322
transparency print quality is
poor 322
uneven print density 322
white streaks 323
print troubleshooting
envelope seals when printing 297
error reading flash drive 297
held jobs do not print 296
incorrect characters print 298
incorrect margins on prints 308
jammed pages are not
reprinted 294
job prints from wrong tray 298
job prints on wrong paper 298
jobs do not print 300
Large jobs do not collate 299
multiple‑language PDF files do not
print 299
paper curl 309
paper frequently jams 295
print job takes longer than
expected 301
tray linking does not work 302
unexpected page breaks
occur 303
printer
basic model 11
fully configured 11
minimum clearances 10
moving 10, 251, 252
selecting a location 10
shipping 252
printer configurations 11
printer control panel 15
factory defaults, restoring 255
indicator light 15
Sleep button light 15
Printer had to restart. Last job may
be incomplete. 282
printer hard disk
disposing of 234
encrypting 236
installing 41
removing 47
wiping 235
printer hard disk encryption 236
printer hard disk memory
erasing 235
printer information
where to find 9
printer IP address
finding 20
printer is printing blank pages 310
printer messages
[x]‑ page jam, open upper rear
door. [202] 262
[x]‑page jam, clear manual feeder.
[250] 268
[x]‑page jam, lift front cover to
remove cartridge. [200–
201] 259
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 270
[x]‑page jam, open tray [x].
[24x] 267
[x]‑page jam, open upper and
lower rear door. [231–234] 263
[x]‑page jam, remove standard bin
jam. [203] 265
[x]‑page jam, remove tray 1 to
clear duplex. [235–239] 266
Cartridge low [88.xy] 272
Cartridge nearly low [88.xy] 272
Cartridge very low, [x] estimated
pages remain [88.xy] 272
Change [paper source] to [custom
string] load [orientation] 272
Change [paper source] to [custom
type name] load
[orientation] 272
Change [paper source] to [paper
size] load [orientation] 272
Change [paper source] to [paper
type] [paper size] load
[orientation] 273
Check tray [x] connection 273
Close door or insert cartridge 273
Close flatbed cover and load
originals if restarting job
[2yy.xx] 273
Close front door 274
Close top access cover 274
Complex page, some data may not
have printed [39] 274
Configuration change, some held
jobs were not restored [57] 274
Defective flash detected [51] 274
Disk full 62 274
Disk full, scan job canceled 274
Disk must be formatted for use in
this device 275
Disk near full. Securely clearing
disk space. 275
Error reading USB drive. Remove
USB. 275
Error reading USB hub. Remove
hub. 275
Fax memory full 275
Fax partition inoperative. Contact
system administrator. 275
Fax server 'To Format' not set up.
Contact system
administrator. 275
Fax Station Name not set up.
Contact system
administrator. 276
Fax Station Number not set up.
Contact system
administrator. 276
Imaging unit low [84.xy] 276
Imaging unit nearly low
[84.xy] 276
Imaging unit very low, [x]
estimated pages remain
[84.xy] 276
Incompatible tray [x] [59] 276
Incorrect paper size, open [paper
source] [34] 276
Insert Tray [x] 277
Install duplex 277
Install Tray [x] 277
Insufficient memory for Flash
Memory Defragment operation
[37] 277
Insufficient memory to collate job
[37] 278
Insufficient memory to support
Resource Save feature [35] 278
Insufficient memory, some Held
Jobs were deleted [37] 278
Insufficient memory, some held
jobs will not be restored
[37] 278
Index 363