Lexmark 037 Printer User Manual


 
Scanner automatic feeder cover open
Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem persists. [840.02]
Try one or more of the following:
Touch Continue with scanner disabled to return to the home screen, and then contact your system support person.
Touch Reboot and automatically enable scanner to cancel the job.
Note: This attempts to enable the scanner.
Scanner jam, remove all originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner maintenance required soon, use ADF Kit [80]
Contact customer support, and then report the message. The printer is scheduled for maintenance.
Serial option [x] error [54]
Try one or more of the following:
From the printer control panel, touch Continue to continue printing.
Check that the serial cable is properly connected and is the correct one for the serial port.
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and computer.
Turn off the printer, and then turn it back on.
Serial port [x] disabled [56]
Try one or more of the following:
From the printer control panel, touch Continue to clear the message.
The printer discards any data received through the specified serial port.
Make sure Serial Buffer is not set to Disabled.
From the printer control panel, set Serial Buffer to Auto in the Serial [x] menu.
Troubleshooting 286