Lexmark 110 Printer User Manual


 
Menu item Description
Hole Punch Mode
2, 3
2, 4
Specifies the number of hole punches in print jobs
Notes:
This menu item is available only when a finisher with Hole Punch is installed.
The values of 2 and 3 are displayed only when the 3 Hole Finisher, that can
also be used for 2 holes, is installed.
The 3 hole finisher allows the user to select 2 or 3 hole punch.
The 4 hole finisher allows the user to select 2 or 4 hole punch.
Offset Pages
None
Between Copies
Between Jobs
Stacks copies or print jobs into staggered sets in an output bin
Notes:
None is the factory default setting. No pages are offset during the print job.
Between Copies offsets each copy of a print job.
Between Jobs offsets each print job.
Quality menu
Menu item Description
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Specifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both Directions
Enhances the printed quality of small fonts and graphics
Notes:
Off is the factory default setting.
Fonts applies this setting only to text.
Horizontally darkens horizontal lines of text and images.
Vertically darkens vertical lines of text and images.
Both Directions darkens horizontal and vertical lines on text and images.
Toner Darkness
1–10
Lightens or darkens the printed output
Notes:
8 is the factory default setting.
Selecting a smaller number can help conserve toner.
Understanding printer menus 110