Lexmark 110 Printer User Manual


 
Installing optional trays
The printer supports the following optional input sources:
2 Tray Module (two 500sheet trays)
2,000sheet dual input trays
2,000sheet high capacity feeder
Duplex unit
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are installing an optional tray after setting up the printer, then turn the
printer off and unplug the power cord, the USB cable, and the Ethernet cable before continuing.
1 Unpack the optional tray, and remove all packing material.
2 Place the tray in the location chosen for the printer.
Note: If you are installing more than one optional tray, the 2,000sheet dual input trays must always be installed
as the first optional trays (configuring from the bottom up).
Note: The optional 500sheet trays and optional 2,000sheet dual input trays are interchangeable.
1
2
3
4
1
2
3
4
1 Tray 3 and Tray 4 (500-sheet trays or 2,000-sheet dual input trays)
2 Tray 1 and Tray 2 (500-sheet trays)
3 Tray 5 (2,000-sheet high capacity feeder)
4 Duplex unit
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.
Additional printer setup 25