Lexmark 110 Printer User Manual


 
3 Tighten the screws.
4 Plug the printer power cord back into a properly grounded electrical outlet, and then turn the printer on.
Installing hardware options
Order of installation
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input
option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and
faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
Install the printer and any options you have purchased in the following order:
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Printer stand or caster base
2,000sheet dual trays and high capacity feeder
Standard or optional 500sheet trays
Duplex unit
Printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
For more information on installing a printer stand, caster base, or 2,000sheet tray, see the setup documentation that
came with the option.
Additional printer setup 24