Filter
Top Products
Insert the hole punch box
Insert the hole punch box into the finisher. Wait for the message to clear.
Note: To learn how to insert the hole punch box, press the up or down arrow button until
Show Me appears, and
then press
.
Load <input src> with <Custom Type Name>
Try one or more of the following:
• Load the specified paper into the specified source to clear the message and continue printing.
• Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
Load <input src> with <Custom String>
Try one or more of the following:
• Load the specified paper into the specified source to clear the message and continue printing.
• Cancel the print job. Press the up or down arrow button until Cancel job appears, then press .
Load <input src> with <size>
Try one or more of the following:
• Load the specified paper into the specified source to clear the message and continue printing.
• Cancel the print job. Press the up or down arrow button until Cancel job appears, then press .
Load <input src> with <type> <size>
Try one or more of the following:
• Load the specified paper into the specified source to clear the message and continue printing.
• Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
Load Manual Feeder with <Custom Type Name>
Try one or more of the following:
• Load the multipurpose feeder with the correct paper type and size.
If the printer finds a tray that has paper of the correct type, it uses the paper from that tray. If the printer cannot
find a tray with the correct paper type, it prints on the paper that is loaded in the default paper source.
• Press the up or down arrow button until Cancel job appears, and then press to cancel the print job.
Troubleshooting 142