Filter
Top Products
Chapter 2. Attaching the 4230 Printer to Your
Computer
| This chapter provides specific instructions on attaching the printer to
| your computer. Models 102 and 1I1 can attach to a computer using
| a twinaxial connector. Models 202 and 2I1 can attach to a
| computer using a coaxial connector. Model 4I3 can attach to three
| computers simultaneously using the parallel, serial, and twinaxial
| connectors. Model 5I3 can attach to three computers simultaneously
| using the parallel, serial, and coaxial connectors. For Models 4I3
| and 5I3, you may want to attach the printer to more than one
| computer. If so, you need to perform the steps in each appropriate
| section.
For Coaxial or Twinaxial, look at the bezel at the rear of the printer.
If your printer has a feature card number or card name of:
Models 102, 1I1, and 4I3 Twinaxial, go to “Models 102, 1I1, and
4I3 Twinaxial Attachment” on page 2-2.
Models 202, 2I1, and 5I3 Coaxial, go to “Models 202, 2I1, and
5I3 Coaxial Attachment” on page 2-17.
For Models 4I3 and 5I3 (when parallel or serial is the active
interface), go to “Models 4I3 and 5I3 (when parallel or serial is the
active interface)” on page 2-20.
Copyright IBM Corp. 1991, 1994 2-1