Filter
Top Products
To manually configure a remote 4230 Printer, use the
parameters given in the following table. Refer to the appropriate
documentation for the remote control unit that you are using.
The printer can be configured to an IBM 5294, 5394, or 5494
Remote Control Unit.
Type your choices and press Enter.
Parameter
Description
Parameter Parameter Setting
Device description DEVD Workstation printer name
Device class DEVCLS *RMT
Device type TYPE *IPDS
Device model MODEL 0000
Advanced Function AFP *NO (See Note)
Location Address LOCADR xx
Online at IPL ONLINE *YES
Attached controller CTL Twinaxial workstation
controller name
Font identifier FONT yyy (Default font identifier)
Form feed FORMFEED *CONT
Note: AFP *Yes can be specified if the level of OS/400
supports the printer as an AFP printer. See step 1 on
page 2-12.
2-14 User’s Guide