Filter
Top Products
This status code is automatically reset by the computer and should
only appear briefly on the display. If the printer continues to display
the message, follow these steps:
CAUTION:
Make sure the machine is turned Off (O) before you connect
or disconnect the power cord or other cables.
If the machine has cables other than the power cord, you
must connect them before you plug the power cord into an
outlet. You must first unplug the power cord from the outlet
when you remove the other cables.
1. Turn the power Off (O).
2. Check that the cable is connected to the printer and to the
computer.
3. Turn the power On (|).
4. If the status code occurs again, call for service.
Dual Purpose Forms Device (F2):
Inserting paper under the blue tractor doors and pressing Start will
display the 016 message. Press Stop, then Load/Eject to advance
the paper under the print head.
This message could also display if the paper present sensor
becomes dirty.
15 COMMUNICATIONS CHECK
CHECK CABLE
16 PRESS STOP THEN LOAD
B-10 User’s Guide