Filter
Top Products
Installing and Using the Dual Purpose Forms Device
(F2)
The following sections describe how to install and use the Dual
Purpose Forms Device (F2).
Note: Make sure that the proper forms device is configured. See
“Preparing for Forms Device Installation” on page 1-10 for the exact
steps.
Installing the Dual Purpose Forms Device (F2)
To install the F2 forms device, follow these steps:
1. Hold the forms device so that the device number F2 is in the
upper left corner facing you. Note the bottom metal bar and the
clips; they will be important later.
Important
The F2 forms device for the 4230 Printer has a box around
the F2 emblem. Use only these forms devices in the 4230
Printer.
Bottom Metal Bar
Clips
Top of Forms Device
Tear Bar
Chapter 1. Setting Up the 4230 Printer 1-55