Filter
Top Products
Waiting
The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional
data.
• Press to print the contents of the buffer.
• Cancel the current print job.
31 Missing or defective <color> cartridge
The specified toner cartridge is either missing or not functioning properly.
• Remove the specified toner cartridge, and then reinstall it.
• Remove the specified toner cartridge, and then install a new one.
32 Replace unsupported <color> cartridge
Remove the specified toner cartridge, and then install a supported one.
34 Incorrect paper type, check <src>
• Load the appropriate paper or other specialty media in the proper tray.
• Check tray length and width guides, and make sure the paper is properly loaded in the tray.
• Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
• Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, make sure
the paper is large enough for the data being printed.
• Cancel the current print job.
34 Incorrect paper size, check <src>
• Load the appropriate paper or other specialty media in the proper tray.
• Press the down arrow button until Continue appears, and then press to clear the message and print the
job using a different paper tray.
• Check tray length and width guides, and make sure the paper is properly loaded in the tray.
• Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
• Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, make sure
the paper is large enough for the data being printed.
• Cancel the current print job.
34 Short paper
Try one or more of the following:
• Load the appropriate paper in the tray.
• Press the down arrow button until
Continue appears, and then press to clear the message and print the
job using a different paper tray.
• Check the tray length and width guides, and make sure the paper is properly loaded in the tray.
• Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
Understanding printer messages
150