Filter
Top Products
Print Material Testing
10
Basic Form Design
When designing forms, include a non-print area of 8.38 mm (0.33 in.) at the top and bottom of the
form and 6.35 mm (0.25 in.) on both sides of the form.
In general, portrait orientation is the preferred layout, especially if you are printing bar codes. If your
forms require landscape orientation, be aware that variations in paper path speed may produce
spacing variations when printing bar codes.
Note: We do not warrant uninterrupted or error-free operation of a product. Warranty
service does not include repair of failures caused by:
• modification or attachments
• accidents or misuse
• unsuitable physical or operating environment
• maintenance by anyone other than Lexmark or a Lexmark authorized servicer
• operation of a product beyond the limit of its duty cycle
• failure to have installed a maintenance kit as specified (if applicable)
• use of printing media outside of Lexmark specifications
• use of other than Lexmark supplies (such as toner cartridges, inkjet
cartridges, and ribbons)
• use of other than Lexmark product or component